Planning a trip without a television installed on your RV is something that most travelers will recommend against. However, getting one of those set up in a small room space can be a bit tricky. For that reason, many opt for the mounting options that are available in the market.
With the best TV mount for rv, it will be pretty easy for you to set the TV up in a good position. Most of these will also offer you some adjustability options that will enable you to get the right viewing angle. As a result, your long drive and planned trips will be more enjoyable for the people that you are with.
Alongside that, most of these are easy to set up as well. There would be no need for you to go through any intricate steps with those.
10 Best RV TV Mount
Getting one of the good mounting options is not that easy. Especially for the overabundance of options, it would get a bit tricky for you to choose one of them.
However, you do not have to worry anymore because we have handpicked the ones that we believe are worth recommending. Take a look at the list that we have huddled:
1. Mounting Dream MD2210
Having the ability to protect the television when the vehicle is moving is something that a unit should have to become the best RV TV wall mount. And this one that is from Mounting Dream has managed to deliver that.
To start with, it implements a unique design. Instead of opting for the regular mounting mechanism, this one has a locking mechanism. That lock will enable it to properly secure the swiveling arms and the backplate. As a result, the chances of the panel getting bumped while your vehicle is in motion will be considerably low.
Aside from its design, the construction of this locking TV wall mount for RV is pretty solid. The manufacturer has utilized high-quality materials for the construction, which makes it a true heavy-duty mounting mechanism. It is capable of holding screens that are up to 44 pounds.
Apart from that, it is compatible with VESA patterns and regular patterns. You should not face any trouble fitting the panels with 75×75, 100×100, 200×100, and 200×200 mm patterns.
This camper TV bracket will offer you a fair amount of adjustability options as well. It will offer you the freedom to tilt the angle from 5 to 45 degrees, which will help reduce the glaring issues that might occur when watching the screen. You can also pull it out to 18.4 inches from the wall and retract it back to 2.4 inches.
Alongside that, the installation process is pretty simple. You will find an instruction manual inside the package that will guide you through the overall process. Also, the included hardware have pre-labeled tags, making it easier for you to handle them around.
Pros
- Utilizes a locking mechanism
- Overall construction is of heavy-duty materials
- Supports VESA and regular patterns
- Can hold up to 44 pounds of weight
- Included hardware has labels on them
Cons
- Locking mechanism loses its tension force overtime
- Bracket might cover the input ports for some TV
2. Mount-It!Lockable Full Motion Wall Mount
Most of the camper TV mounts will utilize a regular mechanism for holding the screen in place. However, this one is different, which is why it should be on your consideration list if you were looking for one of the best TV mounts for RV.
First of all, it implements a unique articulating design. The gear structure in the middle will enable your TV to remain stable even when you are traveling through rough terrains. Your viewing experience will have no effect on the vibrations, and the screen should remain stable throughout the entire journey.
Aside from the gear mechanism, this camper TV mount has a locking mechanism that will securely hold your television. No matter how rough the terrain gets, it will not lose stability. As a result, it will not move from the angle and the position you have set on.
Talking of which, it offers quite an amount of flexibility on the position and the angle. You will have the option to tilt it, extend it, and swivel it. The mechanism can be extended to up to 15.3 inches from the wall. And there is an option that will enable you to fold it down when you are not watching anything.
Apart from that, there are clip routes on the arm. Those will help you to achieve a clean installation. There would not be any wires hanging on the mechanism because of that. You will also receive all of the required hardware inside the box, which will make the installation process a bit more manageable for you.
Lastly, it is compatible with screens that are up to 22 to 42 inches in size. And the weight capacity is up to 33 pounds.
Pros
- Features an articulating design
- Locking mechanism
- Supports screens that are from 22 to 42 inches
- Implements a gear structure to increase the stability
- Offers loads of flexibility options
Cons
- Tilting angle is pretty limited
- Included bracket feels a bit flimsy
3. Perlesmith fold down TV mount for RV
There are plenty of these in the market. But there are only a few that will have a universal design. However, if you were on the lookout for such camper TV brackets, you should check this one out.
To begin with, it is compatible with a wide array of televisions, thanks to the universal design. You should have no trouble in installing the panels that are from 23 inches to 43 inches. And it supports the VESA patterns that are from 75×75 mm to 200×200 mm. Also, the weight capacity of the unit is up to 77 pounds.
Alongside that, it utilizes a unique lockable design. This locking mechanism will ensure that the panel remains stable, even if the road you are treading on is harsh and uneven in some places.
It should also help to prevent the vibration damages that might occur when you are treading such terrains. On that note, you can easily release the locking mechanism to make adjustments to the viewing angle.
Other than that, the construction of the unit is of high-quality materials. For that reason, it will be able to ensure that the screen remains stable and away from damages. And the bracket is pretty easy to work with as well. You would not face any difficulties when you are trying to set this up on your vehicle’s wall.
Apart from that, it offers plenty of adjustability options as well. It tilts from 5 degrees to -15 degrees. You will also have the freedom to swivel it 90 degrees in both the left and right directions. And the folding mechanism will allow you to extend it 15.7 inches from the wall and retract it back to 2.4 inches.
Pros
- Offers a lot of adjustability options
- Features a unique locking mechanism
- Prevents vibration damages
- Keeps the panel stable through the rough terrains
- Has a universal design
Cons
- Locking mechanism has a bit of a play to it
- Included screws might be a little short for some walls
4. GOFORWILD Full Motion LockableMount
Being able to offer loads of customizability options is quite important for the locking TV mounts for RVs. It is the factor that makes them recommendation worthy. And, GOFORWILD has managed to deliver that with this one.
First of all, the manufacturer has utilized high-quality materials for manufacturing this. The combination of such kind of materials makes this one achieve a true heavy-duty construction. And the robot welding mechanism that it has will make sure that the screen is held on with the maximum amount of stability.
Aside from the construction, the bracket is compatible with most of the televisions that are out there. The weight capacity is 22 pounds, and it should be able to hold the screens that are from 10 to 26 inches. Also, the VESA patterns that it supports is 75×75 mm and 100×100 mm.
Alongside that, the arm has a unique design that will enable you to swivel it the way you want to. You will have the full freedom of adjusting the viewing angle. It tilts from 10 to -15 degrees, and the swiveling angle is from 90 to -90 degrees. You can also rotate it from 3 to -3 degrees if you want to.
Other than that, the arm has a locking mechanism that will allow you to lock the position in place. After doing so, the chances of vibration damages occurring will be substantially low. Also, it is going to ensure that your viewing experience does not deteriorate because of the angles.
The installation process would be pretty straightforward, thanks to the manual that the package includes. It will offer you a step-by-step guide, which will make things simple.
Pros
- Features a heavy-duty construction
- Integrates robot welding technology
- Offers plenty of adjustability options
- Installation process is easy
- Has a locking mechanism on the arm
Cons
- Most of the VESA patterns are not compatible
- Some units might ship with a broken locking mechanism
5. Mounting Dream MD2209
The drop down TV mount for RV that some brands are offering in the market will have a locking mechanism but not an easy operational mode. Well, that is where Mounting Dream sets their unit apart.
To start with, it has a unique lockable design. Instead of using gears or any other sort of moving tools, it implements a 10 mm tongue. That will secure the swiveling arms, which is going to ensure that the vehicle’s motion does not cause any damage to the panel.
The tongue is activated using a one-step button. It will be pretty easy for you to activate and deactivate the locking mechanism because of that button. And the installation process is pretty simple and straightforward. It bundles all of the required hardware and a step-by-step instruction manual.
Alongside that, it offers plenty of adjustability options. Depending on the viewing angle that you want, you can tilt the hinge and swivel the arm. The swiveling range is -90 to 90 degrees, which means the chances of glaring occurring for an off-set angle would be reasonably low.
Other than that, the unit can support most of the models that have a screen size from 10 inches to 26 inches. And the weight capacity is 22 pounds. You can mount the panels that have a 75×75 mm and 100×100 mm VESA pattern. The plate that supports the patterns can be rotated from -3 degrees to 3 degrees.
Aside from that, there is a pulling strap on the backplate, which will enable you to properly secure the hefty screens. Worrying about the television falling when you are traveling through rough and harsh terrains will not be something you would have to do if you get this one.
Pros
- Has a one-step locking button
- Swivels from -90 to 90 degrees
- Plate is rotatable
- Features a pull-strap on the backplate
- Can hold up to 22 pounds of weight
Cons
- Not compatible with some of the VESA patterns
- Step button tends to get stiffer over time
6. PAW InternationalBracketexterior RV TV mount
There is a high chance the TV that you have might not have a standard VESA mounting pattern. Well, that is where the mounts, such as this one from PAW, steps in.
Unlike some of the other mounting brackets that are out there, this one supports the 4×4 mounting pattern. That pattern is the most common among the models that do not have a standard VESA pattern on the back. So you should be able to install most of the models with this.
Talking of which, it has a simple and straightforward installation process. You would not have to deal with any extra brackets as this one will go straight onto the wall of your RV. There will be no need to fiddle with wall mounts, nor will there be any need to fix the other mounts before attaching it.
Other than the installation process, it features durable overall construction. PAW has opted for polymer, which is reasonably sturdy. And as the polymer is of high-quality, it will have no trouble in holding the reasonably hefty models. The weight capacity that it has is 30 pounds, which is more than enough for some models
Aside from that, it creates a good enough gap in between the wall and the back of the television. As a result, you would not have to worry about it touching the wall when you are treading on rough and harsh roads. The chances of the panel getting damaged will be considerably low too.
Alongside that, it contains all of the hardware that you are going to need for the installation process. There will be no need for you to opt for anything extra when you are setting this up on your RV.
Pros
- Supports 4×4 mounting pattern
- Creates a good enough gap in between the TV and the wall
- Comes with all the necessary hardware
- Easy to install
- Can hold up to 30 pounds of weight
Cons
- Has no tilting mechanism
- Suitable for small-screen televisions only
7. Master Mounts 2311L
Dealing with knobs and gears for the locking mechanism can be a bit of a hassle. Well, you will not have to deal with that for this, which makes this a worthy pick for the best RV TV mount.
Let us talk about the most highlighting feature of the unit. Instead of knobs, gear, or ties, it utilizes a pull-chain lock. And instead of changing gear with a screwdriver, pushing a knob, or pulling ties, all you have to do is pull the simple chain to activate and deactivate the locking mechanism.
On that note, the locking mechanism is pretty efficient. It securely holds on to your panel, which will limit the movements of the panel while your vehicle is moving. As a result, the chances of it colliding with any surface will be pretty low.
Aside from that, the unit boasts a strong aluminum construction. Such a construction makes it capable of holding up to 33 pounds of weight. And the screens that up to 42 inches should be compatible with this. It even supports the 75×75 and 100×100 VESA mounting patterns.
You will not even have to go through that much trouble in setting this one up. The unit will mount directly on the wall, and you are not going to need any sort of special tools either. There should be an instruction guide in the box, which will guide you through the setup process.
Other than that, it has a swiveling arm that will let you move the panel. You can also tilt it 12 degrees down and 8 degrees up. So it will be pretty for you to position it at the exact viewing angle that you prefer.
Pros
- Features a pull-chain locking activator
- Constructed of sturdy aluminum
- Can hold up to 33 pounds of weight
- Capable of accommodating screens that are up to 42 inches
- Installation process is pretty straightforward
Cons
- Backplate might block the I/O ports of some televisions
- Does not have any rotating mechanism
8. LWL Trailer RV TV Mount
If you were not satisfied with the ceiling mount TV bracket for RV units that are available in the market, you are probably looking for a wall mount, such as this one that is being offered by LWL.
First of all, the overall construction of the unit is of sturdy material. Instead of opting for regular steel that is a regular flip down TV mount for RV would utilize, the manufacturer has sourced out heavy-duty steel for constructing this. For such a construction, it is able to hold up to 55 pounds of weight, which is considerably high.
Aside from the overall construction, the design of the unit is pretty simple yet effective. You would not have to deal with any sort of side brackets or any back brackets. Instead of those, you need to install this directly on the wall, which keeps the setup process straightforward.
Alongside that, the unit is compatible with the panels that are from 13 inches to 30 inches. It also supports the 75×75 mm, 75×100 mm, and 100×100 mm VESA patterns. You can also make the non-VESA 4×4 and 3×3 patterns work with. So there will be no need for you to worry about the compatibility that much.
Other than that, it leaves a good amount of gap in between the screen and the wall. That gap is going to ensure that the panel does not collide with the wall if you happen to tread on bumpy roads. As a result, the chances of damages occurring to your TV will be pretty slim.
Lastly, you are going to receive all of the installation hardware inside the package. Getting something extra for carrying out the installation process will not be something you will have to do for this.
Pros
- Flaunts a heavy-duty construction
- Can hold the panels that are up to 55 pounds
- Capable of accommodating the screens that are up to 30 inches
- Supports VESA and some non-VESA patterns
- Setup process is relatively easy
Cons
- I/O of some of the televisions might get blocked
- Included screws are not that high in quality
9. Mount Plus 1070 Ultra
Even though most of the wall mounts are going to feature durable construction, not all of them will come in as many variations as this one from Mount Plus comes in.
To start with, you are going to have four different options. Depending on your TV’s orientation and size, you can choose the 13 to 27 fixed, 13 to 27 tilting, 23 to 42 fixed, and 23 to 42 tilting one. And no matter which one you pick, what you will end up with will be something that is sturdy and highly stable.
On that note, the manufacturer has utilized high-quality materials for constructing these. For that reason, the weight capacity of these is reasonably high. These are capable of holding the panels that er up to 66 pounds, which is higher than what most of the other mounts are capable of holding.
Aside from the weight capacity, these are compatible with most of the common VESA standards. You can make these work with the 100×100 mm, 200×200 mm, and 200×100 mm patterns. That means these units are going to be compatible with most of the TVs used for RV.
Other than that, you will not even have to go through any hassle in the setup process. The simple design that these have will make the installation process a breeze. Instead of handling around other brackets and side panels, all you need to do is mount these directly to the wall.
Besides that, the gap that these leave between the wall and the panel is quite enough. So even if you plan a trip on bumpy and rough terrain, there would be nothing that you would have to worry about.
Pros
- Four different variations are available
- Utilizes a simple and easy-to-install design
- Supports most of the common VESA patterns
- Overall construction is pretty durable
- Capable of holding up 66 pounds
Cons
- None of the models have a rotating mechanism
- Some of the packages might ship with missing hardware
10. Moview FLNS220QS WEBKIT
You might be searching for something that will enable you to get a flush look but will still leave a bit of a gap between the back of the panel and the wall for safety purposes. Well, in that case, you need to pick this one up.
Unlike some of the average models that are claiming to be the best RV TV mount, this one boasts a quick disconnecting mechanism. That will enable you to quickly mount and dismount your television. Even if you are planning not to purchase a dedicated television for your RV, you can use the one in your home without any issues.
Apart from that, the rear bracket that you are going to receive will allow you to get a flush look on the wall. And even though it enables you to achieve a flush look, it will leave some space in between. That means there will be no need to worry about occasional damages when your vehicle is in motion.
Alongside that, the setup process for the unit is fairly straightforward. It will include everything that you are going to require. So you will not find the need to get anything extra for the process. Also, you would not have to use any special tools either. You should be able to set this one up in about minutes.
Aside from that, it supports most of the common VESA patterns. You can make the 75×75, 100×100, 100×200, and 200×200 mm patterns work with this without any problems.
On that note, the overall construction is pretty solid. The materials used for the construction are all heavy-duty. So, it achieves a 60 pounds weight capacity. However, it is comparatively lightweight, which will make handling it easier.
Pros
- Offers a flush look
- Leaves a good amount of gap
- The installation process is pretty straightforward
- Comes with all of the included hardware
- Supports a wide variety of standard VESA patterns
Cons
- Some of the Samsung TVs are not compatible
- Might block the connectivity port of some models
How to Mount a TV in an RV?
We might have made it easier for you to pick one of the good TV mounts for RV. However, getting one of them is not really the end of the process. You need to install it properly too. Without a proper installation, you would risk both the TV and the wall of your RV. And, for that, you should follow these steps precisely:
Step 1: Get the Adequate Tools
For a good installation, you need to gather all of the necessary tools. And the ones you are going to require for this are a screwdriver for fastening the screws and a drill to make holes on the wall, and adhesives if you do not want to make holes.
Also, you would need a level bubble and other essential tools you might require for the process. It is also best to keep all of them near your reach because searching for them during the process can be a bit of a hassle. And, it might make the process tedious if you have to look for each of the tools.
Step 2: Make Preparations on the Wall
After gathering all of the tools, you need to start preparing the wall. Instead of going for adhesives, you should opt for drilling holes if you plan to set up a large-sized TV. As those are going to be a bit heftier, the holes and the mounting fasteners should be able to offer the required amount of stability.
And for drilling holes, you need to first take measurements for the mount. Take precise measurements and mark the surface before making holes, or else you will end up with holes that are not meant to be on the walls of your RV.
Also, make sure that your holes are leveled because some of the mounts are not going to offer you the ability to rotate and swivel the screen. So if you do not want to end with a TV that is off-set, you must drill the holes with the help of a level bubble.
Most of the units should come with this leveling bubble. However, if your one does not come with one, you should get one separately. These are easily available in the market, and getting one of them should not be that hard.
Step 3: Mount the Rear Bracket
No matter what type of mounting option you pick, it should come with two different pieces. One would be the rear bracket and the second part of the bracket or the te tube that is going to hold the screen.
Nevertheless, you need to set the rear bracket before the other parts. For this, you would have to align the holes with the fastener holes of the bracket. Once you have it aligned properly, push the screws through the holes. Fasten it using a screwdriver.
You need to make sure that the fasteners are adequately fastened. If they are not tightly in place, there is a high risk of your TV falling off when you are on treading on a bumpy road. And if it does fall, the screen is sure to break, which you would not want, would you? For that reason, ensure that the screws are correctly fastened.
Step 4: Install the Rest of the Parts
After installing the rear bracket, you should get yourself working with the other parts. Depending on the model that you have, you might have to install one or two more parts. Nevertheless, the steps are going to be the same for those parts.
Firstly, you must align the holes and then fasten the screws through the hole. Then you should ensure that the screws are properly fastened for this step as well. Without them properly in place, the risks of your panel falling will be the same as the rear bracket.
Step 5: Set the TV on the Mount
With the parts taken care of, you need to make preparation for setting the TV up. You might have to take a bit of help from your friend or a family member if the TV is relatively large and hefty.
That being said, most of the mounts are going to utilize VESA patterns. And setting up VESA patterns is generally easy. All you have to do is align the pattern and plop the screws through. Also, you must consider fastening the screws properly for this step.
And even if your mount and the TV do not have a VESA pattern, you need to follow the same steps, which is to align the pattern and fasten the screws.
Step 6: Make Final Adjustments
Once you have all things set up, you should connect the power cable and other cables on the back. It is highly recommended to use zip ties, which will keep the overall setup clean.
What to Look for Before Buying?
With the installation process aside, let us get to the other important part that you will have to consider, which are the crucial factors, whether it’s the budget tv for bright room or a minimalistic tv. And with those points considered, your chances of getting something that is worthy of spending money on. That being said, the points that we are referring to are as follows:
Screen Size
Before anything else, you need to factor in the size of the screen. Not all of the TVs have the same screen size. Just like that, not all of the mounts have the ability to accommodate all of the screen sizes. So, you have to consider the screen size of your TV before getting one of these.
Do note that if you have a large-sized panel and you get something that is only capable of holding small screens, you will have a mount that would be pretty useless to you.
Weight Capacity
Aside from the screen size, you should consider the weight capacity as well. Even though it is going to largely depend on the overall build quality, there will be some with durable overall construction but will have a considerably low weight capacity.
However, the thing that you need to consider for this case is the weight of your TV. If it is relatively small and lightweight, you should be okay with something with a 30 to 40 pounds capacity.
On the other hand, if your television is comparatively large and hefty, you need to opt for something that has at least 50 pounds capacity. Those should be able to hold your hefty television without any issues at all.
Build Quality
After considering the weight capacity, you would want to factor in the build quality. And the build quality is going to depend on the quality of the materials utilized for the overall construction.
The ones that are of high-quality materials will have a better build quality. On the other hand, the ones that utilize low-quality materials will have an average build quality. And as we are talking about holding something valuable, you would not want to skimp on the build quality.
Stability
Another thing that you would need to factor in is stability. Even though it is going to rely on the installation process the most, the ones with good quality hardware tend to be more stable than the ones with low to medium-quality hardware.
For this reason, we would highly recommend checking the parts that come bundled with the mount. Get the ones that are high in quality.
Included Hardware
Apart from just considering the quality of the included hardware, you must ensure that the package comes with all of the necessary hardware. If you happen to get something that does not come with all of the parts, you will have to get them separately.
And getting them separately means you would have to spend extra money, which will not be that much cost-effective. Considering that, you should get the units that bundle all of the necessary hardware.
Adjustment Mechanisms
Getting a good viewing angle is essential if you want to enjoy watching television. And the adjustment mechanisms are going to make it easier for you to get the right viewing angle.
For this, the first thing that you have to factor in is the tiling mechanism. The units sport a flexible tilting mechanism will enable you to adjust the panel up and down according to your preference.
Alongside that, you should also make sure that it has a swiveling mechanism. The swiveling mechanism is the thing that will let you swivel the panel left and right. And the higher the angle of adjustments that it can offer, the easier it will be for you to get a good viewing angle.
Finally, you need to ensure that it has a rotating mechanism. This mechanism will come in handy if you have somehow managed to screw the holes in an off-angle. There will be no need to redo the installation process just to get a proper alignment if you get something with a rotating mechanism.
Locking Mechanism
No matter how many adjustment mechanisms the mount comes with, if it does not have a proper locking mechanism, there will be a high chance of your panel getting damaged when you are traveling through bumpy roads. For that reason, you should put proper emphasis on this factor.
Frequently Asked Questions
1. Are all of the TV mounts for RV adjustable?
Not really. There are many the fixed mounting options available in the market. Those will only offer you a bit of height adjustability. If you want tilting, rotating, and swivel adjustments, you should opt for the non-fixed ones. Those ones make getting a good viewing angle easier too.
2. Is a ceiling TV mount safe for RV?
There are not that many ceiling mounts for RV. And the ones that are available are not getting also. Also, as RV generally has a low headroom, it is always better to get the wall mounting options. With those, you will not have to sacrifice one bit of your headroom.
3. Can I install a TV mount with adhesive?
Televisions are generally large and heavier in weight. And even though there are pretty strong adhesive strips available in the market, those are not really adequate for holding TVs. So we would recommend not using adhesives to install these. Instead, you should drill holes and install these with screws.
4. Do all of the TV mounts support non-VESA patterns?
No, not all of the units you will stumble upon on the market will support the non-VESA patterns. If you do have a television that does not have a standard VESA pattern, you need to check whether the mount that you are planning to purchase is compatible with the non-VESA pattern that it has or not.
5. Are RV TV mounts safe?
Yes, the ones that have a proper build quality are safe. The ones that you should not purchase are the ones that do not leave a good amount of gap in between the wall and the backside of the television. Also, you should steer clear from the ones that do not have a good build quality.
Final Words
Hopefully, the models that we have covered in our review section made it easier for you to choose the best TV mount for RV. And we would like to conclude by assuring you that no matter which one you pick, you are going to have a good and safe TV-watching experience with it.